Expert Engineering Enterprise manufactures knife edge gate valves that comply with MSS SP81. These gate valves are available in size ranging from 50 mm to 600 mm. Materials of construction include WCB, CF8, CF8M, CF3, CF3M, SS317L, hastelloy-C, etc. Ends are wafer type or lugged design. Accessories are chain wheel, gear, pneumatic or electric actuator, etc.Specials are extended bonnet, deflector cone, soft seated, bi-directional, etc. Testing is as per MSS SP81.

Caliber Valves offers a wide range of non-return valves for practically all rocess fluids. These valves are of lift check type with bolted bonnet construction. They have flanged end connection for easy fitment and maintenance. The non-return valves are designed as per BSI:1868 for a rating of ND 40 and tested as per BS:5160/API:598. Flange drilling can be as per ND: 40/ANSI B16.5 class 150 as the case may be. The valves are available from 15 mm to 200 mm sizes and can also be offered with IBR certificate in form III. The body and cover plate are ASTM A 216 Gr WCB and the seat and disc are CS hard faced with 13 per cent chrome steel for wear resistance. The spindle and other trim are of 13 per cent chrome steel; spiral wound gaskets are provided for positive sealing of the
body cover plate joint. These non-return valves are essentially used for the safety of the equipment and the people handling them particularly in parallel operations. The valves make sure that there is no unintentional bypassing of the process media through the equipment and pipelines when not required.

Ravands Controls manufactures and ffers butterfly valves that are incorporated with smart and robust designs foi ritical applications. These butterfly valves consist of strong single piece moulded body with high strength material. Swing disc is of special design for low breaking torque and ease of closing.
Hexagonal stem design results in more contact surface and chances of failure of disc is less. Oval shaped fixing holes to suit different flange standards have been provided. Specially designed seal hugs the body and disc and seals the flow. Ergonomically design handle makes operation of the valve easy and comfortable. Locking and positioning mechanism is laced inside the handle to prevent them from corrosion and physical damage. Non-wetted parts, stem and locking ring are made up of SS420 for better corrosion resistance. Provision is made in such way that actuator can be mounted by replacing the handle. Actuator can be fixed according to ISO :5211 standards.

IBR certified V K Valves Manufactures Utam brand valves conforming to most stringent controls. These valves are designed to be user friendly, i.e.. easy to install, operate. maintain and are safe. The company offers IBR certified parallel slide blow off valves. These have flanged ends. as per BS : 10 Table -H. Brief specifications: steam working pressure -17.58 kg/cm2 (250 PSIg): max permissible temperature – 2250C (4370F): and hydraulic test pressure – 35.16 kg/cm2 (500 PSIg).The company provides efficient after sales service to the complete satisfaction of its patrons. It uses latest technology like CAD/CAM for designing.

CNC machines, fully quipped laboratory, and has a trained and motivated workforce. Utam alves are suitable for controlling a wide variety of service fluids within the specified pressure ranges and working temperatures. The ompany has been bestowed with various certifications like BIS, IBR and ISO: 9001- 2000, and approvals from big industrial users, government, semi-government and private sector.

Dip-Flon Engineering & Company is one of India’s distinguished manufacturers, fabricators and exporters of PTFE/ Teflon moulded and Teflon lined components. The range includes Teflon (PFA-FEP) lined ball valves, plug valves, flush bottom valves, check valves, dip pipes, spragers, feed pipes, butterfly valves, spindles, flow tubes, Teflon spares for glass-lined vessels and reactors and equipments,DFE compressors spare and many more. The company has state-of-the-art infrastructure and a dedicated workforce that enables it to satisfactorie meet the market requirement. The comprehensive product range includes PTFE lined valves. The Dipflon float check valve combines the corrosion resistance and product purity of FLO-VU sight glass with a unique Teflon PFA ball float assembly that prevents
overfilling of the bottom chamber. It is intended as a means of preventingvent-line contamination in sampling or dosing of application

Parth Plastic Industries, an ISO 9001:2000 company, has been in operation since 1991
manufacturing products like polypropylene and high density polyethylene ball valves, diavalves, foot valves, flow indicators, Y-type strainers, pipe fittings and a host of other accessories in various size, the maxisoft seated; design and
manufacturing standard-as per manufacturer’s standard end connections-flanged as per ANSI b 16.5 (150#) as per BS 10 (table D/E/F) and DIN standard, and engineering options-teflon coated rubber, EPDM, rubber, viton rubber on request.
Available materials of construction: PP (polypropylene); HDPED (high density
polyethylene); isotactic PP; and PVD (Polyvinylidene fluoride).

SchuF is German ISO approved company manufacturing mostly non-standard valves for special applications in the various process and pharmaceutical industries. State of the art manufacturing facilities are existing in Germany, Ireland, India, Brazil and USA

We have many patented designs.

The range includes :

Drainage Is Fast : Port diameter of the ball is equal to the pipe bore
when valve is opened the flow is straight through, full and unobstructed.Drainage Is Easy : The quater-turn open to close feature, it also
requires exceptionally low operating torque.
Drainage Is Complete : The ball is located very near to the tank,inimizes
space, this prevent sludge and other trapped sediment from accumulating.

Flow-Tek Valves & Controls A leading Manufacturer of Specialized Control Valves offers a self Actuating Pilot Operated Automatic Control Valve specially design for Liquid Service, Also called as a Multifunction Control Valve.

These type of Valves are designed to provide different combination of Pilot Arrangements that can be used for various types of functions like : On/Off, Pressure Reducing,Pressure Relief, Flow Control, Pump Bypass, Non Return & many more.

Pinch Valves as shown in the Photographs are Seatless & Glandless, Straight through valves. They are lined with an elastomer, which is collapsed, by a pinch bar or clamp for throttling and closure a segmented metal body surround the
sleeve, a lifting mechanism is attached to the top & bottom sleeve surface to ensure opening in vacuum service. However a minor pressure will readily return the sleeve to its full port round section, giving full flow of pipeline. Heavy duty reinforced elastomer sleeve trim is the only wetted part, eliminating packing, valve seats and mechanical parts which are the source of high maintenance.

These valves are normally rated from full vacuum to 150 PSI and are suitable to temp of 350 °F. Size range is 1″ to 12″ they handle corrosive slurries, abrasive media, Liquid with Solid suspensions and many others which are difficult to handle with seat valve.

Specifications :

For more details contact :

Size : Available from ¾” to 6″ line size

End Connections : Mostly flanged type & can be drilled as per the required standards.

Packing : Asbestos, Teflon or graphited asbestos Spring Loaded Teflon, V cups self compensating type for steam packing.

Diaphragm : Neoprene rubber with canvas insertion.

Actuator : Direct acting, Spring return type Air to open OR Air to close.

Types : 2 way type for ON/OFF operations 3 way type for MIXING / DIVERTING operations.

Special Feature : There is the Heat Radiating section on the bonnet, with evenly spaced efficient radiating fins, Saves the actuator from the effects of from the pipeline.

The principle of Reflex Level Gauges is based on the difference in the refractive indices of liquid and vapor. the liquid column is contained within the recess of the liquid chamber behind the sight glass which is clamped to the gauge body. The sight glass has prismatic right angled grooves on the side facing the liquid and vapor space. Light rays entering from outside the gauge are either absorbed or reflected depending upon whether they enter the liquid or vapor space , it is reflected to the opposite surface of the grooves and from there, totally reflected back to the direction of observation. thus, vapor space appears as silvery white. When the light ray encounters the surface of the grooves in the liquid space, it is totally absorbed, thereby making the liquid behind the
glass appear black.

Usage : Used for observing various liquids by using reflextion of light and for high pressure. high
temperature excepting steam line.

Engineers Combine offers Two piece design, ANSI Class 150, 300 and 600, 900# from ½” (15 mm NB) to 12″ (300 mm NB) in Flanged and Butt Weld ends, in Full and Reduced Port construction. We can offer Investment Casting upt 100 MB in calss 150# for CF8/CF8M/exotic materials. Trunnion Mounted/Floating Ball Design. Manual/Gear Operated/Actuated (Double Acting/Spring Retrun fail design). We can offer fire safe type tested Ball valve as per API 607

Brightech Valves offers Pulp Valve. (Plate Valve) which are carefully design to offer unrestricted smooth flow of viscous Fluids, Recesses free straight passage orifice offers minimum body contact of line fluid, avoids Accumulation of viscous fluid in the orifice ensures unaltered velocity.

Brightech Pulp Valve are widely used in Sugar Industries for handling Molasses, Isolation of Pulp & and Fibrous material in Paper Industries. Ideally suitable for
hopper Isolation in the Cement Industries. For corrosive Slurries in the Chemical Industries, powder Application Minerals & Metal Industries, coal Ash with Abrasive Particle in the Coal & Mining Industries.

Specification :

Types : O.S. & Y Type, Rising Spindle

MOC : Cast Iron, Carbon Steel, SS 304 / 316

Pressure Rating : ASA 150#

End Connections : Wafer Type

Sizes : 2″ TO 18″

Drilling : ANSI B 16.5, BS
10 TABLE “D”, “E” & “F”

UKL presents the complete valve automation system for ball and butterfly valves, for 0n-off,regulating and control function as per customers
requirements.

Systems can also be offered for emergency operation conditions requiring shut-off or fail safe or stay-put conditions, coarse and fine filling / weighing, and controlled response.

The control systems, including the pneumatic rotary actuators, offered meet all the critical requirements of hazardous, abrasive and corrosive environments.

UKL Ball Valves: 2 and 3 piece, Socket, Screwed and Flanged ends. Available in CS, SS, MOC, and PTFE seals. Sizes 15mm to
200mm The valves are provided with mounting pads as per ISO5211 for mounting of actuators if required.

The Seals are uniquely profiled so as to ensure equal class VI sealing both upstream as well as downstream.

UKL High Performance Butter Fly valves are available in sizes 40mm to 300mm and above too. PN10 / ASA150 rating Wafer type, and can be mounted between any standard Pipes Flanges.

In SS316/304 with SS Flap and PTFE / EPDM / NITRILE seals. Also available in CI MOC with SS / CI Flap.

As Ball valves the Butter fly valves can too be provided with Mounting pads as per ISO5211 for mounting of Actuators, VDI/VDE for mounting of accessories and NAMUR for Solenoid valves.

Flush Bottom Ball valves and Control Dampers: can be supplied too.

Actuators – Electro Pneumatic: All the above valves can be provided with Actuators of Electro pneumatic linear, Electro pneumatic Rotary, Single and Double acting type, with accessories like Solenoid valves, 2 and 3, Position Indicators.

Positioner with I/P Converters too can be provided with the Actuators, making it a complete Automation system.

Motorised Type

Size : Available from 1″ to 4″ line size.

Construction Features :

Body Material : Cast steel, Cast Iron as per requirement. Internal working parts of Stainless steel, Bolted bonnet.

End Connections : Flanges can be drilled as per BS, ANSI, DIN & ISS Standard

Actuator : Electric motor type

Current : AC, 230V, 50Hz

Valve Action : ON to open OR ON to close

Types : 2 way type for On/Off operations 3 way type for Mixing/Diverting operations.

Salient Feature :

For more details contact :

Flowchem Industries manufactures segmented ball valve. This is a Quarter turn ball valve having segment of ball in place of complete sphere ball. Lesser weight,unobstructed flow and economical valve can be successfully used in

For more details contact :